Arc Roof & Gutter Sealant
A rubberised sealant specially developed for repairing leaking gutters, downpipes and flashings. Provides a permanent water resistant and weatherproof seal. Has a life performance expectancy up to 10 years. Suitable for sealing leaks in gutters, down pipes and flashings. Can also be used for bedding roof sheets and felts.
Arc MS-11-MS Polymer
Adhesive & Sealant
Based on a hybrid polymer formulation giving outstanding bonding and sealing properties. Outperforms and replaces construction adhesives, wood glues, PU adhesives, sealants and acrylics. Can be applied underwater. Safe on delicate materials such as lead, mirrors and natural stone.
Mini Mesh Angle Bead 2.4m
Mini Mesh Bead (25mm wing, 3mm plaster depth)
Designed for use with one coat plaster work down to a 3mm finish.
Fine mesh wings to provide an excellent plastering key.
Installation: Installation usually achieved by pressing the wings firmly into plaster dabs placed at approximately 600mm centres both sides of the arris. The wings may alternatively be embedded into the first coat of plaster for normal two-coat work.
Beads may be cut to size as required by using a hacksaw and snips. Beads should be stored off the ground and in dry conditions during site work.
Avialable in 2.4m x 1.2m x 25mm
2.4m x 1.2m x 50mm
2.4m x 1.2m x 75mm
2.4m x 1.2m x 100mm
Ballytherm insulation is a foil faced Polyisacyanurate (PIR) insulation board
The PIR board is formed by a continuous foaming process which gives the board its tight cell structure and bonds the facing to the foam
After foaming the boards are cut to size and left to cure
Ballytherm is a strong rigid board suitable for self-supporting applications in floors walls and roofs
It can withstand the loadings in groundbearing floors
Ballytherm insulation is produced with a zero ozone depletion blowing agent. The insulation boards low thermal conductivity means less material is required
to achieve a given thermal resistance than for most other insulants